TAG-8000 HV Wireless Phase Detector
Darui Electric recommends：
Product Introduction
TAG-8000 HV Wireless Phase DetectorDuring construction or maintenance of power system ring networks and dual-supply grids, Phase verification on both sides of closed-loop circuit breakers is a critical test — failure may cause short circuits with severe consequences. The TAG-8000 Wireless HV Phase Detector employs the latest power electronics detection and wireless transmission technology for safe, reliable, and convenient operation, overcoming the limitations of wired phase detectors and complying with national power safety equipment quality inspection standards.
The key advantage of the TAG-8000 HV Wireless Phase Detector is eliminating connecting wires between two grid (power source) terminals — range up to 20m, penetrates walls and barriers without terrain or structural limitations, enhancing safety. Extremely convenient single-person operation with one supervisor.
Also Known As
Phase Detector, Phase Tester, Phase Verifier, Wireless Phase Detector, HV Phase Detector, HV Phase Tester, Voice Phase Detector, Voice Phase Tester, Wireless Phase Tester, Digital Phase Detector, Digital Phase Tester, Phase Checker, HV Phase Checker.
Product Features
1. High-capacity maintenance-free lithium battery powers the entire unit — eliminates issues with disposable carbon/zinc and button cells (low capacity, difficult replacement). Ideal for field operations; no battery swaps needed means no spark risk, meeting mining equipment safety standards.
2. Long test range up to 200m line-of-sight; penetrates walls and barriers.
3. LCD displays phase, waveform, and frequency simultaneously. Safe and reliable testing with real female voice announcing results for faster operation.
4. Telescopic insulated rod — easy to carry and operate. Insulation meets power industry withstand voltage test requirements.
5. Portable receiver with sleek ergonomic design and anti-slip finish.
6. Advanced manufacturing process; compact size and lightweight.
Technical Parameters
1. Electrical Specifications
(1) Detectable voltage range: 0.4~500kV
(2) Wireless transmission range: ≥200m line-of-sight (customizable for >300m)
(3) In-phase definition: strictly per regulation — phase angle ≤30° = in-phase; phase angle ≥30° = out-of-phase
(4) Operating frequency: 45~60Hz; usable for 60Hz grid phase verification overseas.
2. Insulation Specifications
(1) Transmitters (×2): high-voltage-resistant nylon body; insulation grade: 80kV/cm.
(2) Insulated telescopic rod: military-grade moisture-proof insulation tubing, conforms to IEC/1C78 standards. Features moisture resistance, high voltage endurance, impact and bending resistance.
(3) Complies with national standards GB13398-92, GB311.1-311.6-8, 3DL408-91, and the latest power industry standard DL/T971-2005 "General Technical Requirements for 1kV~110kV Portable Phase Detectors for Live-line Operation."
Note: The above information and technical parameters are compiled and published by Yangzhou Darui Electric Co., Ltd.
